News: Putting FUN and FRIENDLINESS, FIRST into owning and learning about AMC small bodied cars, primarily Eagles, Spirits and Concords as well as vehicles built in AMC's Mexican subsidiary, VAM.

The AMC Eaglepedia can now be accessed using the buttons found below  This is a comprehensive ever growing archive of information, tips, diagrams, manuals, etc. for the AMC Eagle and other small bodied AMC cars. 

Also a button is now available for our Face Book Group page.


Welcome to the AMC Eagles Nest.  A new site under "old" management -- so welcome to your new home for everything related to AMC Eagles, Spirits and Concords along with opportunities to interact with other AMC'ers.  This site will soon be evolving to look different than it has and we will be incorporating new features we hope you will find useful, entertaining and expand your AMC horizons.

You can now promote your topics at your favorite social media site by clicking on the appropriate icon (top upper right of the page) while viewing the topic you wish to promote.


  • March 28, 2024, 09:25:25 AM

Login with username, password and session length

Author Topic: Stock voltage on the ignition coil  (Read 2794 times)

0 Members and 1 Guest are viewing this topic.

Offline rommel1940

  • Eagle
  • **
  • Posts: 93
  • Thumbs Up 2
Stock voltage on the ignition coil
« on: December 16, 2015, 08:50:04 AM »
Ok guys I'm curious, before you mess with you stock eagle wiring to your coil, what is the dc voltage on the coil? Set your meter to dc volts and check the yellow and green wire on top of the coil, I am interested what voltage you may have, My wiring is stock and I get around 4volts, what are you getting? I just finished the big cap upgrade and I am experiencing improvements, but I left my resister in because my coil only had 1.4 ohms resistance. I read tons of stuff on this subject but theres so much conflicting information, we need a consensus on what works and what reliable.
« Last Edit: December 17, 2015, 03:44:43 PM by rommel1940 »
1984 Eagle Limited

Offline mo.eagles

  • Eagle DL
  • ***
  • Posts: 241
  • Thumbs Up 13
Re: Stock voltage ignition coil
« Reply #1 on: December 16, 2015, 05:55:34 PM »
Service manual says 6v +/-  .5v . If you have 4v that's to low . Manual says to disconnect the capacitor and check voltage again .
'85 wagon Limited   tilt wheel , cruise control
power seats ,windows and locks
rear window washer /wiper 
tach and gauge package
A/C
 '85 wagon   power windows and locks
rear window washer/wiper
factory tow package
A/C

Offline rommel1940

  • Eagle
  • **
  • Posts: 93
  • Thumbs Up 2
Re: Stock voltage ignition coil
« Reply #2 on: December 16, 2015, 09:13:31 PM »
Thats interesting, I will do that.
1984 Eagle Limited

Offline rommel1940

  • Eagle
  • **
  • Posts: 93
  • Thumbs Up 2
Re: Stock voltage ignition coil
« Reply #3 on: December 17, 2015, 01:22:48 PM »
Ok with the car not running I have 5.6 volts across the coil, no capacitor. Running I have about 3.5 volts across the coil no capacitor. Yellow wire to ground while runnning I have 10.5 volts, green wire to ground while running I have 7-8 volts, too me the car is running strong. Does this sound correct.
1984 Eagle Limited

Offline rommel1940

  • Eagle
  • **
  • Posts: 93
  • Thumbs Up 2
Re: Stock voltage on the ignition coil
« Reply #4 on: December 17, 2015, 03:44:15 PM »
Ok I just read a very interesting post one the amc forum,it basically says that mine is normal, and with the engine running with the resister wire it will be around 4 volts, not running about 6 volts.I guess I'm good.Funny when everyone checks there voltage they must do it with the motor not running, because its the ignition module that drops the voltage with the engine running.
1984 Eagle Limited

 

SMF spam blocked by CleanTalk