AMC Eagle Den Forum

The Shop => Body Shop => Topic started by: kevindpm61 on September 26, 2015, 10:29:11 AM

Title: SX/4 Rear Bumper End Cap Question
Post by: kevindpm61 on September 26, 2015, 10:29:11 AM
Our project 1983 SX/4 needs rear bumper end caps. I understand that the rear caps are specific only to the SX/4 and are difficult to find. I'm sure that used ones will be brittle and have a tendency to crack just like the current ones.
I haven't been able to find anybody who reproduces these parts. Does anybody know if an end cap from a Jeep Cherokee XJ could be modified to use in a pinch?
Title: Re: SX/4 Rear Bumper End Cap Question
Post by: BajaMx1983SX4 on August 09, 2021, 11:44:45 PM
i was wondering the same... any update??
Title: Re: SX/4 Rear Bumper End Cap Question
Post by: vangremlin on August 10, 2021, 11:19:09 AM
A forum member was able to make some Eagle wagon rear end caps work on his Kammback.  The SX/4 would be similar except they are slightly shorter.

http://forums.amceaglesden.com/index.php?topic=45260.msg351238#msg351238
Title: Re: SX/4 Rear Bumper End Cap Question
Post by: BajaMx1983SX4 on August 12, 2021, 02:30:46 AM
Thanks 4 the link, i´ll check it out!!
Title: Re: SX/4 Rear Bumper End Cap Question
Post by: vangremlin on August 12, 2021, 11:18:59 AM
Also, I understand there was some talk a couple months ago on the Eaglesden Facebook page about someone reproducing the SX/4 end caps.  I'm not a member but someone told me that it could be in the works.  You may also want to check there.  Good luck!